Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 60 (LIGHTING SYSTEM)REPAIR INSTRUCTIONSHIGH MOUNT STOP LAMP REPLACEMENT (HATCHBACK)
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol
High Mount Stop Lamp Replacement (Hatchback)
2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION High Mount Stop Lamp Replacement (Hatchback)
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Open and support the liftgate assembly. |
|
| 1 | High Mount Stop Lamp Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in) |
| 2 | High Mount Stop Lamp Cover Procedure Remove the cover and the four screws from the high mount stop lamp. |
| 3 | High Mount Stop Lamp Assembly Procedure Release the electrical connector and (LED) Light Emitted Diode lamp from the cover. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.