Liftgate Latch Striker Replacement

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Liftgate Latch Striker Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
GM2479285Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear compartment sill trim plate. Refer to Rear Compartment Sill Trim Plate Replacement .
1 Liftgate Latch Striker Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
22 N.m (16 lb ft)
2 Liftgate Latch Striker
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.