SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 49 (WIPER SYSTEM AND WASHER SYSTEM)REPAIR INSTRUCTIONSWINDSHIELD WASHER NOZZLE REPLACEMENT
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol

Windshield Washer Nozzle Replacement

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Windshield Washer Nozzle Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
GM2495872Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the hood insulator. Refer to Hood Insulator Replacement .
1 Windshield Washer Nozzle (Qty: 2)

Procedure

  1. Disconnect the windshield washer hose at the washer nozzle being serviced.
  2. Using two fingers, squeeze the locking tabs on the underside of the hood on the washer nozzle.
  3. Push the washer nozzle outward from the hood while rotating the washer nozzle to the right.
  4. Remove the windshield washer nozzle from the hood assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.