SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 49 (WIPER SYSTEM AND WASHER SYSTEM)REPAIR INSTRUCTIONSWINDSHIELD WASHER NOZZLE HOSE REPLACEMENT
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol

Windshield Washer Nozzle Hose Replacement

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Windshield Washer Nozzle Hose Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
GM2497593Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the hood insulator. Refer to Hood Insulator Replacement .
1 Windshield Washer Nozzle Hose

Procedure

  1. Disconnect the windshield washer hose at the front fender upper left hand bracket from the windshield washer solvent container pump hose.
  2. Disconnect the windshield washer hose retainer at the hood hinge.
  3. Disconnect all three washer hose retainers from the underside of the hood assembly.
  4. Disconnect the windshield washer hose at both windshield washer nozzle spouts.
  5. Remove the windshield washer hose from the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.