K74 Human Machine Interface Control Module X1

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION K74 Human Machine Interface Control Module X1
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
GM1653409
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15136073
  • Service Connector: 15136073
  • Description: 16-Way F 0.64 Kaizen Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13575845 J-35616-64B (LT BU) J-38125-215A SAIT-A03T-M064 Yazaki 14 P P
Pin Size Color Circuit Function Terminal Type ID Option
1 0.35 GY/YE 5149 Voice Recognition Audio Signal I -
2 0.35 BK/GY 5152 Voice Recognition Audio Low Reference I -
3 - 4 - - - Not Occupied - -
5 0.35 WH/BU 5986 Serial Data Communication Enable I -
6 - - - Not Occupied - -
7 0.75 RD/VT 340 Battery Positive Voltage I -
8 0.75 BK/WH 2051 Signal Ground I -
9 0.5 GN/WH 7527 Local Interconnect Network Serial Data Bus 5 I -
10 - - - Not Occupied - -
11 0.35 BU/GN 1304 High Speed GMLAN Serial Data (+)9 I -
12 0.35 WH/GN 1305 High Speed GMLAN Serial Data (-)9 I -
13 0.35 BU/GN 1304 High Speed GMLAN Serial Data (+)9 I -
14 0.35 WH/GN 1305 High Speed GMLAN Serial Data (-)9 I -
15 - 16 - - - Not Occupied - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.