K40P Seat Memory Control Module - Passenger X3

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION K40P Seat Memory Control Module - Passenger X3
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
GM2231648
Connector Part Information
  • Harness Type: Passenger Seat Cushion
  • OEM Connector: 7283-6467-40
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 12-Way F 2.8 Kaizen Series (L-GY)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-35 (VT) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Function Terminal Type ID Option
1 1.5 BU/BN 77 Passenger Power Seat Recline Motor Rearward Control I -
2 1.5 GN 76 Passenger Power Seat Recline Motor Forward Control I -
3 1.5 GN/BU 298 Passenger Power Seat Front Vertical Motor Down Control I -
4 1.5 GN/VT 297 Passenger Power Seat Front Vertical Motor Up Control I -
5 1.5 BU/WH 289 Passenger Power Seat Rear Vertical Motor Down Control I -
6 1.5 GN/WH 288 Passenger Power Seat Rear Vertical Motor Up Control I -
7 - 10 - - - Not Occupied - -
11 1.5 YE/BU 290 Passenger Power Seat Horizontal Motor Rearward Control I -
12 1.5 YE/WH 296 Passenger Power Seat Horizontal Motor Forward Control I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.