Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 17 (COMPONENT CONNECTOR END VIEWS (K20 - K60))COMPONENT CONNECTOR END VIEWSK20 ENGINE CONTROL MODULE X2 (L96)
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol
K20 Engine Control Module X2 (L96)
2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION K20 Engine Control Module X2 (L96)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575812 | J-35616-64B (LT BU) | J-38125-213 | Not Available | Not Available | Not Available | Not Available |
| II | 13579770 | J-35616-4A (PU) | J-38125-11A | 7116-4152-02 | Yazaki 9 | A | 5 |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | BU/VT | 2121 | Ignition Control 1 | I | - |
| 2 | 0.5 | GN/YE | 1744 | Fuel Injector Control 1 | I | - |
| 3 | 0.5 | BN/GY | 878 | Fuel Injector Control 8 | I | - |
| 4 | 0.5 | BN/VT | 877 | Fuel Injector Control 7 | I | - |
| 5 | 0.5 | YE/WH | 1745 | Fuel Injector Control 2 | I | - |
| 6 | 0.5 | BN/BU | 846 | Fuel Injector Control 6 | I | - |
| 7 | 0.5 | BN/GN | 845 | Fuel Injector Control 5 | I | - |
| 8 | 0.5 | BN/YE | 844 | Fuel Injector Control 4 | I | - |
| 9 | 0.5 | BN/VT | 1746 | Fuel Injector Control 3 | I | - |
| 10 | - | - | - | Not Occupied | - | - |
| 11 | 0.5 | VT/BN | 5284 | Camshaft Phaser Intake Solenoid 1 | I | - |
| 12 - 14 | - | - | - | Not Occupied | - | - |
| 15 | 0.5 | YE | 581 | Throttle Actuator Control Open | I | - |
| 16 | 0.5 | BN/WH | 582 | Throttle Actuator Control Close | I | - |
| 17 | 0.5 | VT/WH | 2128 | Ignition Control 8 | I | - |
| 18 | 0.5 | YE/BU | 2124 | Ignition Control 4 | I | - |
| 19 | 0.5 | BK/GY | 2130 | Ignition Control Low Reference Bank 2 | I | - |
| 20 | 0.5 | BK/VT | 6272 | Crankshaft 60X Sensor Low Reference | I | - |
| 21 - 23 | - | - | - | Not Occupied | - | - |
| 24 | 0.5 | BK/GN | 5301 | Camshaft Position Intake Sensor Low Reference 1 | I | - |
| 25 | 0.5 | BK/VT | 2755 | Oil Pressure Sensor Low Reference | I | - |
| 26 - 27 | - | - | - | Not Occupied | - | - |
| 28 | 0.75 | VT/BU | 5290 | Powertrain Main Relay Fused Supply 1 | I | - |
| 29 | 0.5 | BK/BN | 6753 | Cam Phaser W Low Reference | I | - |
| 30 - 32 | - | - | - | Not Occupied | - | - |
| 33 | 0.5 | GN/GY | 2127 | Ignition Control 7 | I | - |
| 34 | 0.5 | BU/GY | 2125 | Ignition Control 5 | I | - |
| 35 | 0.5 | BK/BU | 2129 | Ignition Control Low Reference Bank 1 | I | - |
| 36 | 0.5 | VT/BU | 6270 | Crankshaft 60X Sensor 5V Reference | I | - |
| 37 - 39 | - | - | - | Not Occupied | - | - |
| 40 | 0.5 | GY/BU | 5300 | Camshaft Position Intake Sensor Control 1 | I | - |
| 41 | 0.5 | WH/RD | 2705 | Oil Pressure Sensor 5V Reference | I | - |
| 42 | - | - | - | Not Occupied | - | - |
| 43 | 0.5 | BN/YE | 2701 | Throttle Position Sensor 5V Reference | I | - |
| 44 | 0.5 | BK/BN | 2752 | Throttle Position Sensor Low Reference | I | - |
| 45 | 0.5 | BU/WH | 3630 | Throttle Position Sensor (SENT1) Signal | I | - |
| 46 | - | - | - | Not Occupied | - | - |
| 47 | 0.5 | WH/BK | 3111 | Heated Oxygen Sensor Low Signal Bank 1 Sensor 1 | I | - |
| 48 | 0.5 | YE/WH | 3211 | Heated Oxygen Sensor Low Signal Bank 2 Sensor 1 | I | - |
| 49 | 0.75 | BK/YE | 1716 | Knock Sensor Low Reference 1 | I | - |
| 50 | 0.75 | BK/GY | 2303 | Knock Sensor Low Reference 2 | I | - |
| 51 | - | - | - | Not Occupied | - | - |
| 52 | 0.5 | GN/YE | 3212 | Heated Oxygen Sensor Heater Low Control Bank 2 Sensor 1 | I | - |
| 53 | 0.5 | BU/WH | 2122 | Ignition Control 2 | I | - |
| 54 | 0.5 | BN/BU | 2126 | Ignition Control 6 | I | - |
| 55 | 0.5 | GN/BU | 2123 | Ignition Control 3 | I | - |
| 56 | 0.5 | GN | 6271 | Crankshaft 60X Sensor Signal | I | - |
| 57 - 59 | - | - | - | Not Occupied | - | - |
| 60 | 0.5 | YE/VT | 5275 | Camshaft Position Intake Sensor 1 | I | - |
| 61 | 0.5 | YE/BN | 331 | Oil Pressure Sensor Signal | I | - |
| 62 - 66 | - | - | - | Not Occupied | - | - |
| 67 | 0.5 | VT/GY | 3110 | Heated Oxygen Sensor High Signal Bank 1 Sensor 1 | I | - |
| 68 | 0.5 | VT/WH | 3210 | Heated Oxygen Sensor High Signal Bank 2 Sensor 1 | I | - |
| 69 | 0.75 | VT/GY | 496 | Knock Sensor Signal 1 | I | - |
| 70 | 0.75 | WH/GY | 1876 | Knock Sensor Signal 2 | I | - |
| 71 | - | - | - | Not Occupied | - | - |
| 72 | 0.5 | GY/WH | 3113 | Heated Oxygen Sensor Heater Low Control Bank 1 Sensor 1 | I | - |
| 73 | 2.5 | BK/WH | 451 | Signal Ground | II | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.