S48A Multifunction Switch - Instrument Panel

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION S48A Multifunction Switch - Instrument Panel
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
GM1710983
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15499371
  • Service Connector: 19115105
  • Description: 12-Way F 0.64 Kaizen Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13575742 J-35616-64B (LT BU) J-38125-215A SAIT-A03T-M064 Yazaki 14 P P
Pin Size Color Circuit Function Terminal Type ID Option
1 - - - Not Occupied - -
2 0.35 BU/VT 1788 Traction Control Switch Signal 1 I -
3 0.35 GY/GN 2555 Rear Park Assist Disable Signal I -
4 0.35 GN/BN 5852 Rear Park Assist LED Disable Signal I -
5 0.35 WH 6816 Indicator Dimming Control I -
6 0.35 WH 3152 Lane Departure Warning Indicator Control I -
7 0.35 YE 6817 LED Backlight Dimming Control I -
8 0.75 BK 1850 Ground I -
9 0.35 BU/YE 6844 ABS/TCS Hill Descent Control Switch Signal I -
10 0.35 GY/WH 3153 Lane Departure Warning Disable Switch Signal I -
11 0.35 GN/GY 5286 Adjustable Pedal Switch Forward Signal I -
12 0.35 WH/GY 5285 Adjustable Pedal Switch Rearward Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.