K9 Body Control Module X6

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION K9 Body Control Module X6
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
GM3240147
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 13962300
  • Service Connector: 13587576
  • Description: 27-Way F 0.64, 2.8 Series (L-PU)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13582297 J-35616-64B (LT BU) J-38125-22 Not Available Not Available Not Available Not Available
II 13587507 J-35616-35 (VT) J-38125-12A SNAC-A061T-M2.8 Delphi 20 C A
III Not Required No Tool Required No Tool Required Not Available Not Available Not Available Not Available
Pin Size Color Circuit Function Terminal Type ID Option
1 1.5 BU/WH 195 Door Lock Control II -
2 1.5 GY/GN 3271 Door Lock Control 2 II -
3 1.5 BK 1850 Ground II -
4 1.5 BN/YE 294 Door Lock Actuator Unlock Control II -
5 0.35 VT/GY 1303 Lift Gate Ajar Switch Signal 1 I -
6 0.5 WH/BU 3203 Right Headlamp Bulb Outage Signal I -
7 0.5 YE/WH 58 Right Cornering Lamp Control I -
8 0.35 VT/WH 5908 Passenger Seat Vent Motor Control 1 I -
9 0.5 GN/BU 6133 Local Interconnect Network Serial Data Bus 2 I -
10 0.5 GN/YE 6134 Local Interconnect Network Serial Data Bus 3 I -
11 - - - Not Occupied - -
12 0.5 YE/BK 5356 Left Tail Lamp Outage Detection Signal I -
13 0.5 VT/BU 7598 Glass Breakage Sensor Signal 2 III -
14 - - - Not Occupied - -
15 0.35 GY/GN 6190 Lift Glass/Rear Compartment Lid Exterior Release Signal I -
16 0.5 GN/BN 6132 Local Interconnect Network Serial Data Bus 1 I -
17 0.35 GN/VT 5906 Driver Seat Vent Motor Control 1 I -
18 - 20 - - - Not Occupied - -
21 0.5 BU/VT 3204 Left Headlamp Bulb Outage Signal I -
22 0.5 VT/YE 5357 Right Tail Lamp Outage Detection Signal I -
23 - - - Not Occupied - -
24 0.5 BU 2500 High Speed GMLAN Serial Data (+) 1 I -
25 0.5 WH 2501 High Speed GMLAN Serial Data (-) 1 I -
26 - - - Not Occupied - -
27 0.35 WH/VT 2092 Fuel Saver Mode (ECO) Switch Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.