K9 Body Control Module X4

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION K9 Body Control Module X4
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
GM3240145
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 13962485
  • Service Connector: 13587579
  • Description: 26-Way F 0.64, 2.8 Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13582297 J-35616-64B (LT BU) J-38125-22 Not Available Not Available Not Available Not Available
II 13582298 J-35616-64B (LT BU) J-38125-22 Not Available Not Available Not Available Not Available
III 13587507 J-35616-35 (VT) J-38125-12A SNAC-A061T-M2.8 Delphi 20 E A
Pin Size Color Circuit Function Terminal Type ID Option
1 0.75 YE 712 Left Headlamp Low Beam Control III -
2 0.75 YE 312 Right Headlamp Low Beam Control III -
3 0.75 GN/VT 1315 Right Front Turn Signal Lamp Control III -
4 0.5 BN/GN 19 Right Rear Stop/Turn Lamp Control III -
5 0.75 WH/YE 7541 Right Rear Stop Lamp Control II -
6 0.75 GY/YE 7542 Left Rear Stop Lamp Control II -
7 0.75 GY/BU 7538 Left Front DRL Control II -
8 0.35 GY/YE 6188 Lift Glass/Rear Compartment Lid Motor Release Control I -
9 - 10 - - - Not Occupied - -
11 0.5 VT/WH 5065 Stop Lamp Relay Coil Control I -
12 0.35 GY/VT 755 RAP Relay Coil Control I -
13 0.5 GN/YE 6846 Rear License Lamp Control I -
14 0.35 BN/GY 2268 Windshield Washer Relay Control I -
15 0.35 GN/VT 5199 Run/Crank Relay Coil Control I -
16 0.35 GY 91 Windshield Wiper Motor Relay Coil Control I -
17 0.5 BN/GN 196 Windshield Wiper Motor Park Switch Signal I -
18 0.35 WH/YE 5075 Current Sensor Signal I -
19 0.35 BU/YE 6844 ABS/TCS Hill Descent Control Switch Signal I -
20 0.75 RD/YE 2340 Battery Positive Voltage II -
21 0.35 BU/VT 5076 Current Sensor Control I -
22 0.35 VT/YE 5985 Accessory Wakeup Serial Data I -
23 0.5 WH/BU 5986 Serial Data Communication Enable I -
24 0.5 BN/GN 109 Hood Ajar Switch Signal I -
25 0.35 YE/BU 4086 Pushbutton Start Challenge Active Signal I -
26 0.75 BK/WH 451 Signal Ground II -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.