K9 Body Control Module X2

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION K9 Body Control Module X2
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
GM2180237
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 13943361
  • Service Connector: 13576637
  • Description: 27-Way F 0.64, 2.8 Series (L-BU)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13582297 J-35616-64B (LT BU) J-38125-22 Not Available Not Available Not Available Not Available
II 13587507 J-35616-35 (VT) J-38125-12A SNAC-A061T-M2.8 Delphi 20 E A
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 RD/WH 2740 Battery Positive Voltage II -
2 0.75 BK 1850 Ground II -
3 0.5 RD/BN 2940 Battery Positive Voltage II -
4 0.75 RD/VT 4040 Battery Positive Voltage II -
5 - - - Not Occupied - -
6 0.35 GY 5697 Child Lockout Indicator Control I -
7 0.35 WH/GN 526 Stop Lamp Switch Signal I -
8 0.5 YE 6817 LED Backlight Dimming Control I -
9 0.35 YE/GY 44 Instrument Panel Lamp Dimmer Switch Signal I -
10 0.35 WH/BU 278 Ambient Light Sensor Signal I -
11 - - - Not Occupied - -
12 0.35 BN/BU 391 Rear Window Wiper Switch Signal I -
13 0.35 GY/RD 598 5V Reference I -
14 0.35 BU/VT 1788 Traction Control Switch Signal 1 I -
15 0.35 BN/WH 781 Driver Door Lock Switch Unlock Signal I -
16 0.35 GY 3273 Remote Function Actuator Low Reference I -
17 0.35 BU/GN 5723 Ignition Mode Switch Mode Voltage I -
18 0.35 GN/WH 4047 Glove Box Door Release Signal I -
19 0.35 BN/YE 780 Driver Door Lock Switch Lock Signal I -
20 0.5 WH/BU 3691 Trailer Brake Apply Signal I -
21 0.5 GN/GY 6135 Local Interconnect Network Serial Data Bus 4 I -
22 - 24 - - - Not Occupied - -
25 0.35 GY/WH 3272 Remote Function Actuator Control I -
26 0.35 GN/WH 111 Hazard Switch Signal I -
27 0.35 YE/GN 3274 Remote Function Actuator Transmit Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.