Q8 Control Solenoid Valve Assembly X1

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Q8 Control Solenoid Valve Assembly X1
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
GM3277917
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 13878751
  • Service Connector: 19303772
  • Description: 16-Way F 1.5 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13578934 J-35616-66 (YE) J-38125-28 2 21 24 47220 0 Yazaki 12 E 1
Pin Size Color Circuit Function Terminal Type ID Option
1 - 2 - - - Not Occupied - -
3 0.5 WH/GY 1786 Transmission Park/Neutral Signal 1 I -
4 0.75 RD/GN 1840 Battery Positive Voltage I -
5 0.75 BK/WH 451 Signal Ground I -
6 - 8 - - - Not Occupied - -
9 0.5 VT/YE 5985 Accessory Wakeup Serial Data I -
10 0.5 BU 2500 High Speed GMLAN Serial Data (+) 1 I -
11 0.5 WH 2501 High Speed GMLAN Serial Data (-) 1 I -
12 0.5 VT/BK 2139 Run/Crank Ignition 1 Voltage I -
13 0.5 WH 2501 High Speed GMLAN Serial Data (-) 1 I -
14 0.5 BU 2500 High Speed GMLAN Serial Data (+) 1 I -
15 - - - Not Occupied - -
16 0.5 BN/WH 6354 Output Speed High (Replicated TOS) Input Signal I -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.