Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 12 (COMPONENT CONNECTOR END VIEWS (A6D - B87))COMPONENT CONNECTOR END VIEWSA23D DOOR LATCH ASSEMBLY - DRIVER
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol
A23D Door Latch Assembly - Driver
2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION A23D Door Latch Assembly - Driver
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | GY | 745 | Left Front Door Ajar Switch Signal | I | - |
| 2 | 0.35 | WH/YE | 3574 | Driver Door Open Switch Signal | I | - |
| 3 | 0.5 | BK | 1150 | Ground | I | - |
| 4 | 0.35 | WH/VT | 3270 | Driver Door Lock Motor Status Signal | I | - |
| 5 | 0.35 | BU/VT | 1124 | Door Lock Key Switch Unlock Signal | I | - |
| 6 | 0.75 | BN | 5910 | Door Double Lock Actuator Lock Control | I | - |
| 7 | 0.75 | GY | 5911 | Door Lock Actuator Lock Control 2 | I | - |
| 8 | 0.75 | BN/BK | 294 | Door Lock Actuator Unlock Control | I | - |
| 9 - 10 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.