Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 117 (HORN SYSTEM)DESCRIPTION AND OPERATIONHORNS SYSTEM DESCRIPTION AND OPERATIONSYSTEM OPERATION
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol
System Operation
2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION System Operation
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
The vehicle horn system is activated under the following conditions:
- When the horn switch is depressed
- The BCM commands the horns ON under any of the following conditions:
- When the content theft deterrent system detects a vehicle intrusion - For further information refer to Theft Systems Description and Operation .
- When the panic button is depressed on the remote control door lock transmitter - For further information refer to Keyless Entry System Description and Operation .
- When the keyless entry system is used to lock the vehicle, a horn chirp may sound to notify the driver that the vehicle has been locked. The notification feature may be enabled or disabled through personalization. For further information refer to Keyless Entry System Description and Operation
.
When the OnStar® system is used to sound the horns if equipped - For further information, refer to OnStar Description and Operation .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.