X84 Data Link Connector

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION X84 Data Link Connector
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
GM68793
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 12110250
  • Service Connector: 12110250
  • Description: 16-Way F 150 Metri-Pack Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 13580059 J-35616-14 (GN) J-38125-12A 12129484 Delphi 19 E A
II 13580059 J-35616-14 (GN) J-38125-12A 12129484 Delphi 19 E C
Pin Size Color Circuit Function Terminal Type ID Option
1 0.5 GN 5060 Low Speed GMLAN Serial Data II -
2 - - - Not Occupied - -
3 0.5 BU/VT 3813 High Speed GMLAN Serial Data (+) 4 II -
4 1 BK 1050 Ground I -
5 0.75 BK/WH 1851 Signal Ground I -
6 0.5 BU 2500 High Speed GMLAN Serial Data (+) 1 II -
7 - 10 - - - Not Occupied - -
11 0.5 WH 3811 High Speed GMLAN Serial Data (-) 4 II -
12 0.5 BU/YE 6105 High Speed GMLAN Serial Data (+) 2 II -
13 0.5 WH 6106 High Speed GMLAN Serial Data (-) 2 II -
14 0.5 WH 2501 High Speed GMLAN Serial Data (-) 1 II -
15 - - - Not Occupied - -
16 0.5 RD/WH 640 Battery Positive Voltage II -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.