Front View Camera Replacement

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Front View Camera Replacement
WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
GM3419132Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary ProcedureΒ 
Windshield Multifunction Sensor Mount Bracket Cover Replacement
1 Front View Camera

Procedure

  1. Gently depress top center tab on bracket to release camera.
  2. Disconnect the electrical connector.
  3. After replacement of the front view camera, program the front view camera. Refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.