SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSPOWER DOOR LOCK SYSTEM AND RELEASE SYSTEMS - REPAIR INSTRUCTIONSREPAIR INSTRUCTIONSREAR SIDE DOOR OUTSIDE HANDLE CABLE REPLACEMENT
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol

Rear Side Door Outside Handle Cable Replacement

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Rear Side Door Outside Handle Cable Replacement
GM2725394Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the rear side door latch and handle bracket assembly from the door. Refer to Rear Side Door Latch Replacement .
1 Rear Side Door Outside Handle Cable

Procedure

  1. Remove the rear side door outside handle cable from the retainers.

    Do not remove the inside door handle cable from the latch.

  2. Release the cable from the back of the latch assembly.
  3. Unhook the cable from the handle bracket.
NOTE:

Ensure that the door lock system operates properly before installing the trim.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.