Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (S79LR TO X92A)COMPONENT CONNECTOR END VIEWSS79P WINDOW SWITCH - PASSENGER (-A45)
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol
S79P Window Switch - Passenger (-A45)
2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION S79P Window Switch - Passenger (-A45)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | BK | 1250 | Ground | I | - |
| 2 | 0.35 | VT/GY | 2765 | Power Window Switch Right Front Express Signal | I | - |
| 3 | 0.35 | BN/YE | 167 | Power Window Master Switch Right Front Down Signal | I | - |
| 4 | 0.5 | RD/BU | 840 | Battery Positive Voltage | I | - |
| 5 | 0.35 | YE | 6817 | LED Backlight Dimming Control | I | - |
| 6 | 0.35 | YE/BK | 166 | Power Window Master Switch Right Front Up Signal | I | - |
| 7 - 12 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.