Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019TAHOE LS, 4WD, GAS/ETHANOLREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (M5 TO Q17B L96)COMPONENT CONNECTOR END VIEWSM95L ASSIST STEP - LEFT (BRS)
2019 Chevrolet Tahoe LS, 4WD, Gas/Ethanol
M95L Assist Step - Left (BRS)
2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION M95L Assist Step - Left (BRS)
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-5 (PU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 2 | WH/BN | 7471 | Articulating Running Boards Motor Left Control Extend | I | - |
| 2 | 0.5 | VT/RD | 7468 | Running Boards Motor Hall Sensor Left 5V Reference | I | - |
| 3 | 0.5 | YE | 7467 | Running Boards Motor Hall Sensor Left Signal | I | - |
| 4 | 0.5 | YE/BN | 7466 | Running Boards Motor Hall Sensor Left Low Reference | I | - |
| 5 | 2 | GY | 7472 | Articulating Running Boards Motor Left Control Retract | I | - |
| 6 | - | - | - | Not Occupied | - | - |
| 7 | 0.5 | GY/GN | 5996 | Driver Outside Rear View Mirror Puddle Lamp Control | I | - |
| 8 | 0.5 | BK | 1750 | Ground | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.