K36 Inflatable Restraint Sensing and Diagnostic Module X1

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION K36 Inflatable Restraint Sensing and Diagnostic Module X1
G00406220Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 13887360
  • Service Connector: 19328755
  • Description: 24-Way F 0.64 Series, Sealed (YE)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I 19328872 J-35616-64B (LT BU) J-38125-215A Not Available Not Available Not Available Not Available
II 19368490 J-35616-64B (LT BU) J-38125-215A Not Available Not Available Not Available Not Available
Pin Size Color Circuit Function Terminal Type ID Option
1 0.35 OG/GN 3023 Steering Wheel Module Stage 2 High Control I -
2 0.35 WH/OG 3022 Steering Wheel Module Stage 2 Low Control I -
3 0.35 BN/OG 3020 Steering Wheel Module Stage 1 Low Control I -
4 0.35 OG/VT 3021 Steering Wheel Module Stage 1 High Control I -
5 0.35 YE/OG 3025 Passenger IP Module Stage 1 High Control I -
6 0.35 OG/WH 3024 Passenger IP Module Stage 1 Low Control I -
7 0.35 OG/VT 3026 Passenger IP Module Stage 2 Low Control I -
8 0.35 GY/OG 3027 Passenger IP Module Stage 2 High Control I -
9 0.5 RD/GN 4440 Battery Positive Voltage II -
10 0.35 VT/WH 5234 Passenger Seat Belt Indicator Control I -
11 0.35 BU 2307 Passenger Air Bag On Indicator Control I -
12 0.35 GN 2308 Passenger Air Bag Off Indicator Control I -
13 0.35 VT/OG 371 Passenger IP Module Disable Switch Signal I -
14 0.35 BU/OG 7328 Passenger IP Module Disable Switch Low Reference I -
15 0.5 GN 5060 Low Speed GMLAN Serial Data II -
16 - - - Not Occupied - -
17 0.5 WH/BU 5986 Serial Data Communication Enable II -
18 0.5 BU/YE 6105 High Speed GMLAN Serial Data (+) 2 II -
19 0.5 BK/WH 2751 Signal Ground II -
20 0.5 WH 6106 High Speed GMLAN Serial Data (-) 2 II -
21 - 24 - - - Not Occupied - -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.