Active Noise Cancellation Microphone Grille Replacement

2019 Chevrolet Tahoe LS, 4WD, Gas/EthanolSECTION Active Noise Cancellation Microphone Grille Replacement
GM3637199Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Lower the headlining trim panel in the location of the microphone grille to be replaced. Refer to Headlining Trim Panel Replacement (Standard Wheelbase)Headlining Trim Panel Replacement (Extended Wheelbase) .
1 Active Noise Cancellation Microphone Grille (Qty: 3)
Procedure 
Using the appropriate tool, gently remove grille from the headlining trim panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.