SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN GREPAIR AND DIAGNOSISSTEERINGSTEERING COLUMNSTEERING WHEEL AND COLUMNREPAIR INSTRUCTIONSSTEERING COLUMN HOUSING REPLACEMENT
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G

Steering Column Housing Replacement

2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION Steering Column Housing Replacement
GM2074178Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Steering Column Tilt Spring Replacement 
  2. Ignition Lock Cylinder Case Replacement
1 Steering Column Pivot Pin [2x]

Procedure

  1. Use the CH-21854 - 01  remover to remove the steering column tilt head pivot pins from the steering column tilt head assembly.
  2. Before installing, lubricate the steering column tilt head pivot pins with the GM recommended lubricant.
  3. Once installed, stake the steering column in three locations around each steering column tilt head pivot pin.

Special Tools 
CH-21854 - 01  Pivot Pin Remover
Equivalent regional tools:Special Tools 
2 Steering Column Tilt Head Assembly
Procedure 
Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.