Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
Instrument Panel Knee Bolster- Left Side(1) - Remove - Instrument Panel Knee Bolster Replacement (Left Side)Instrument Panel Knee Bolster Replacement (Right Side)
Instrument Panel Knee Bolster- Right Side(1) - Remove - Instrument Panel Knee Bolster Replacement (Left Side)Instrument Panel Knee Bolster Replacement (Right Side)
Instrument Panel Cluster Trim Plate(1) - Remove - Instrument Panel Cluster Trim Plate Replacement
Heater and Air Conditioning Control(2) - Remove - Heater and Air Conditioning Control Replacement
Instrument Panel Upper Trim Panel(1) - Remove - Instrument Panel Upper Trim Panel Replacement
Windshield Defroster Outlet Duct Nut (1) - Remove[2x]
Windshield Defroster Outlet Duct Bolt(1) - Remove
Windshield Defroster Outlet Duct(1) - Remove
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.