SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN GREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 89 (HEATING SYSTEM, VENTILATION SYSTEM, AND AIR CONDITIONING SYSTEM)REPAIR INSTRUCTIONSAIR CONDITIONING COMPRESSOR BRACKET REPLACEMENT (LWN)INSTALLATION PROCEDURE
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G

Installation Procedure

2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION Installation Procedure
WARNING: This page is about a different car, the 2018 GMC Savana 3500, 2018 GMC Savana 2500, 2018 Chevrolet Express 3500, and 2018 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4620178

    Air Conditioning Compressor Bracket(1) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Air Conditioning Compressor Bracket Bolt(2) - Install and tighten[4x]45 N.m (33 lb ft)
  3. GM4620174

    Air Conditioning Compressor(1) - Install - Air Conditioning Compressor Replacement (LWN) Air Conditioning Compressor Replacement (LV1) Air Conditioning Compressor Replacement (L96, LC8) 

  4. GM4620171

    Air Conditioning Compressor Hose(1)@Air Conditioning Compressor - Install - Air Conditioning Compressor Hose Replacement (LWN) Air Conditioning Compressor Hose Replacement (L96, LC8, LV1) 

  5. GM4620172

    Air Conditioning Compressor and Condenser Hose(1)@Air Conditioning Compressor - Install - Air Conditioning Compressor and Condenser Hose Replacement (LWN) Air Conditioning Compressor and Condenser Hose Replacement (L96, LC8) 

  6. GM4580873

    Drive Belt(2)@Air Conditioning Compressor - Install - Drive Belt Replacement

  7. GM4528759

    Front Wheelhouse Splash Shield-Left Side(3) - Install - Wheelhouse Splash Shield Replacement (Left Side)Wheelhouse Splash Shield Replacement (Right Side)

  8. GM4629596

    Exhaust Gas Recirculation Valve(1) - Install - Exhaust Gas Recirculation Valve Replacement

  9. Recharge the refrigerant. Refrigerant Recovery and Recharging 
  10. Inspect for refrigerant leaks.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.