Transmission General Specifications

2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION Transmission General Specifications
WARNING: This page is about a different car, the 2018 GMC Savana 3500, 2018 GMC Savana 2500, 2018 Chevrolet Express 3500, and 2018 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Name 8L45 8L90 8L90
RPO Codes M5N, M5T M5U, M5X MQE
Production Location Toledo, OH (USA)
Silao (Mexico)
Toledo, OH (USA) Toledo, OH (USA)
Transmission Drive Rear Wheel Drive Rear Wheel Drive Rear Wheel Drive
1st Gear Ratio 4.62 4.560 4.560
2nd Gear Ratio 3.04 2.971 2.971
3rd Gear Ratio 2.07 2.075 2.075
4th Gear Ratio 1.66 1.688 1.688
5th Gear Ratio 1.26 1.270 1.270
6th Gear Ratio 1.000 1.000 1.000
7th Gear Ratio 0.85 0.845 0.845
8th Gear Ratio 0.66 0.652 0.652
Reverse 3.93 3.818 3.818
Torque Converter Size - Diameter of Torque Converter Turbine 238 mm 258 mm 237 mm
262 mm
Pressure Taps Line Pressure Line Pressure Line Pressure
Transmission Fluid Type DEXRON® HP DEXRON® HP DEXRON® HP
Transmission Type: 8 Eight Forward Gears Eight Forward Gears Eight Forward Gears
Transmission Type: L Longitude Mount Longitude Mount Longitude Mount
Transmission Type: 45/90 Product Series Product Series Product Series
Position Quadrant P, R, N, D, M P, R, N, D, M P, R, N, D, M
Case Material Die Cast Aluminum Die Cast Aluminum Die Cast Aluminum
Transmission Net Weight (Approximate) 80 kg (176 lb) 95 kg (210 lb) 98 kg (216 lb)
Maximum Trailer Towing Capacity Refer to applicable owner's manual Refer to applicable owner's manual Refer to applicable owner's manual
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.