Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fastener Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Propeller Shaft Center Support Bearing Retainer |
| Propeller Shaft Slip Yoke Boot |
| Propeller Shaft Slip Yoke Boot Clamp |
| Propeller Shaft Universal Joint |
| Propeller Shaft Universal Joint Spider Bearing Retaining Ring |
| Rear Propeller Shaft Retainer |
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Rear Propeller Shaft Bolt | 25 N.m (18 lb ft) |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Propeller Shaft Bearing Bolt | 40 N.m (30 lb ft) |
| Front Propeller Shaft Bearing Nut | 40 N.m (30 lb ft) |
| Propeller Shaft Hanger Bolt | 52 N.m (38 lb ft) |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.