Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
Plenum Drain Tube (2) - Install
- Plenum Drain Tube Nut (1) - Install and tighten [4x] 5.5N.m (49 lb in)
Radiator Vent Inlet Hose (1) - Install - Radiator Vent Inlet Hose Replacement (LWN)Radiator Vent Inlet Hose Replacement (L96, LC8)
Charge Air Cooler Inlet Hose (2) - Install - Charge Air Cooler Inlet Air Hose Replacement
Radiator Surge Tank (1) - Connect - Radiator Surge Tank Replacement (LWN)
Refer to Fastener Caution .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.