SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN GREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 41 (POWER DOOR LOCK SYSTEM AND RELEASE SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESPOWER DOOR LOCKS MALFUNCTIONCIRCUIT/SYSTEM VERIFICATION
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G

Circuit/System Verification

2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION Circuit/System Verification
WARNING: This page is about a different car, the 2018 GMC Savana 3500, 2018 GMC Savana 2500, 2018 Chevrolet Express 3500, and 2018 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Driver Door Lock Switch parameter and the Driver Door Unlock Switch parameter changes from Inactive to Active when pushing the appropriate switch on the S13D Door Lock Switch-Driver.
    • If a parameter does not change 

      Refer to Circuit/System Testing - Driver Door Lock Switch Malfunction.

    • Go to next step: If the parameter changes 
  3. Verify the scan tool Passenger Door Lock Switch parameter and the Passenger Door Unlock Switch parameter changes from Inactive to Active when pushing the appropriate switch on the S13P Door Lock Switch-Passenger.
    • If the value is always Inactive 

      Refer to Circuit/System Testing - Passenger Door Lock Switch Inoperative.

    • If a parameter is always Active 

      Refer to Circuit/System Testing - Passenger/Cargo Door Lock Switch Malfunction.

    • Go to next step: If the parameter changes 
  4. Verify the scan tool Passenger Door Lock Switch parameter and the Passenger Door Unlock Switch parameter changes from Inactive to Active when pushing the appropriate switch on the S13A Door Lock Switch-Rear Cargo.
    • If the value is always Inactive 

      Refer to Circuit/System Testing - Rear Cargo Door Lock Switch Inoperative.

    • If a parameter is always Active 

      Refer to Circuit/System Testing - Passenger/Cargo Door Lock Switch Malfunction.

    • Go to next step: If the parameter changes 
  5. Verify all vehicle doors Lock and Unlock when pushing the appropriate switch on the S13D Door Lock Switch-Driver.
    • If a driver, passenger or rear cargo door LOCK or UNLOCK functions do not work 

      Refer to Circuit/System Testing - Driver/Passenger/Cargo Door Lock Malfunction.

    • If the M14RR Door Lock Actuator-Right Rear LOCK or UNLOCK function does not work 

      Refer to Circuit/System Testing - Right Rear Door Lock Malfunction.

    • If all door LOCK or UNLOCK function do not work 

      Refer to Circuit/System Testing - Door Lock And Unlock Inoperative.

    • Go to next step: If the LOCK and UNLOCK function for all doors works 
  6. All OK
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.