Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
Vehicle Yaw Sensor with Vehicle Lateral Accelerometer (1) - Install
- CAUTION:
Refer to Fastener Caution .
Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Nut (1) - Install and tighten [3x] 9 N.m (80 lb in)
Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Electrical Connector (1) - Connect
Rollover Sensor Cover (1) - Install
- Calibrate the vehicle yaw sensor with vehicle lateral accelerometer. Vehicle Yaw Sensor Learn
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.