Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN GREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 26 (FRAME AND UNDERBODY)SPECIFICATIONSFASTENER SPECIFICATIONS
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G
Fastener Specifications
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION Fastener Specifications
WARNING: This page is about a different car, the 2018 GMC Savana 3500, 2018 GMC Savana 2500, 2018 Chevrolet Express 3500, and 2018 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Body Mount Bolt | 140 N.m (103 lb ft) |
| Brake Combination Valve @ Transmission Support Crossmember Mounting Bolt | 10 N.m (89 lb in) |
| Engine Crossmember Bolt (CA - 14, 200 lb GVW) | |
|
85 N.m (63 lb ft) |
|
90 Degrees |
| Engine Crossmember Bolt (CA and HD) | 135 N.m (100 lb ft) |
| Engine Protection Shield Mounting Bolt | 20 N.m (15 lb ft) |
| Fuel Filter Bracket @ Transmission Support Crossmember Bolt | 30 N.m (22 lb ft) |
| Hitch @Frame Bolt | 88 N.m (65 lb ft) |
| Hitch @Frame Nut | 88 N.m (65 lb ft) |
| Splash Shield @ Wheelhouse Bolt | 4 N.m (35 lb in) |
| Tie Down Bracket @Frame Bolt | 80 N.m (59 lb ft) |
| Transmission Mount @ Transmission Support Crossmember Nut (AWD) | 60 N.m (44 lb ft) |
| Transmission Mount @ Transmission Support Crossmember Nut (RWD) | 60 N.m (44 lb ft) |
| Transmission Support Crossmember @ Frame Mounting Bolt (Cutaway) | 65 N.m (48 lb ft) |
| Transmission Support Crossmember @ Frame Mounting Bolt (except Cutaway) | 50 N.m (37 lb ft) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.