Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN GREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSCOMPONENT CONNECTOR END VIEWS (Q77H - X92)COMPONENT CONNECTOR END VIEWSS79D WINDOW SWITCH - DRIVER
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G
S79D Window Switch - Driver
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION S79D Window Switch - Driver
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-4A (PU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| A | 3 | L-BU | 166 | Power Window Master Switch Right Front Up Signal | I | - |
| B | 0.35 | BN/WH | 230 | Instrument Panel Lamp Dimming Control | I | - |
| C | 3 | D-GN | 1001 | Retained Accessory Power Ignition | I | - |
| D | 3 | TN | 167 | Power Window Master Switch Right Front Down Signal | I | - |
| E | - | - | - | Not Occupied | - | - |
| F | 3 | BK | 450 | Ground | I | - |
| G | 3 | D-BU | 164 | Power Window Motor Left Front Up Control | I | - |
| H | 3 | BN | 165 | Power Window Motor Left Front Down Control | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.