Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN GREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENT PANEL AND CONSOLE TRIMSPECIFICATIONSFASTENER SPECIFICATIONS
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G
Fastener Specifications
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Communication Interface Module Bracket Bolt | 2.5N.m (22 lb in) |
| Front Floor Lower Console Bolt | 6.5N.m (58 lb in) |
| Instrument Carrier Bolt | 50N.m (37 lb ft) |
| Instrument Panel Driver Knee Bolster Brace Bolt | 3.5N.m (31 lb in) |
| Instrument Panel Driver Knee Bolster Deflector Bracket Nut | 10N.m (89 lb in) |
| Instrument Panel Extension Bolt | 2.5N.m (22 lb in) |
| Instrument Panel Knee Bolster Inner Bracket Nut | 10N.m (89 lb in) |
| Instrument Panel Lower Compartment Door Lock Bolt | 3N.m (27 lb in) |
| Instrument Panel Lower Extension Tray Bolt | 2.5N.m (22 lb in) |
| Instrument Panel Trim Pad Bolt | 2.5N.m (22 lb in) |
| Instrument Panel Upper Trim Pad Bracket Bolt | 2.5N.m (22 lb in) |
| Instrument Panel Upper Trim Panel Bolt | 2.5N.m (22 lb in) |
| Rear Floor Air Duct Bolt | 2.5N.m (22 lb in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.