SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019EXPRESS 2500 BASE, VAN CARGO EXTENDED, 6.0L ENG VIN GREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM AND PANELINGREPAIR INSTRUCTIONSBODY SIDE FRONT TRIM PANEL REPLACEMENT - LEFT SIDE
2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN G

Body Side Front Trim Panel Replacement - Left Side

2019 Chevrolet Express 2500 Base, Van Cargo Extended, 6.0L Eng VIN GSECTION Body Side Front Trim Panel Replacement - Left Side
GM4855801Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Rear Bench Seat Removal and Installation (With Bench Seat) , or Rear Bench Seat Removal and Installation (With Split Bench)
  2. Upper Pillar Garnish Molding Replacement 
  3. Body Side Rear Garnish Molding Replacement 
1 Body Side Front Trim Panel Retainer
Procedure 
Use a flat bladed plastic trim tool.
2 Body Side Front Trim Panel- Left Side

Procedure

  1. Use a flat bladed plastic trim tool.
  2. Grasp and gently pull inward and forward in order to disengage the retaining tabs.
  3. Ensure seat belts are properly seated in the guide slots prior to securing panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.