Roof Console Replacement

2019 Chevrolet Cruze LS, 4D HatchbackSECTION Roof Console Replacement
GM4959874Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary ProcedureΒ 
Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
1 Roof Console
NOTE:

The retainers are stronger than the console assembly. During removal, the console may separate, and if this happens, the roof console will need to be reassembled.

Procedure

  1. Use a flat bladed plastic tool to remove.
  2. Disconnect all electrical connectors.
  3. Transfer components as necessary.
  4. Reassemble the roof console if it becomes separated upon removal.
  5. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.