Rear Side Door Window Weatherstrip Replacement

2019 Chevrolet Cruze LS, 4D HatchbackSECTION Rear Side Door Window Weatherstrip Replacement
GM5043958Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Rear Side Door Window Replacement 
  2. Rear Side Door Window Upper Reveal Molding Replacement 
  3. Rear Side Door Window Frame Front Applique Replacement
1 Rear Side Door Window Weatherstrip Bolt
Tighten 
9 N.m (80 lb in)
2 Rear Side Door Window Weatherstrip

Procedure

  1. Pull the rear side door window weatherstrip away from the outer window flange to remove.
  2. Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.