Rear Side Door Outside Handle Cable Replacement

2019 Chevrolet Cruze LS, 4D HatchbackSECTION Rear Side Door Outside Handle Cable Replacement
GM3665610Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Rear Side Door Latch ReplacementΒ 
  2. Rear Side Door Outside Handle Bracket ReplacementΒ 
1 Rear Side Door Outside Handle Cable

Procedure

  1. Release the retainer. [2x]
  2. Release the cable from the back of the latch assembly.
  3. Remove the front side door outside handle cable from the front side door outside handle bracket.
NOTE:

Ensure that the door lock system operates properly.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.