Rear Side Door Lock Cylinder Opening Cover Replacement

2019 Chevrolet Cruze LS, 4D HatchbackSECTION Rear Side Door Lock Cylinder Opening Cover Replacement
GM3650439Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Bolt Access Plug
Procedure 
Use a flat bladed plastic tool to remove.
2 Rear Side Door Outside Handle Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
4.7 N.m (42 lb in)
3 Rear Side Door Lock Cylinder Opening Cover

Procedure

  1. Pull the lock cylinder from the housing to remove.
  2. Inspect the lock, lock cylinder and handle adjustments.
NOTE:

Pull the rear side door outside handle to unlock the door lock cylinder opening cover.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.