Removal Procedure

2019 Chevrolet Cruze LS, 4D HatchbackSECTION Removal Procedure
  1. Front Side Door Outside Handle Replacement (without Keyless Entry)Β Front Side Door Outside Handle Replacement (with Keyless Entry)Β  - Remove
  2. Front Side Door Window Regulator Replacement - Remove
  3. GM3952753Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Outside Handle Bracket Fastener (1) - Remove

  4. GM3952765Courtesy of GENERAL MOTORS COMPANY

    Remove the front side door latch fastener (2).

  5. Loose the front side door latch fastener (1).
  6. Remove the front side door latch with front side door outside handle bracket from front side door.
  7. GM3952767Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Outside Handle Cable (3) @ Front Side Door Outside Handle Bracket (1) - Remove

  8. Unlock the front side door outside handle cable (3) from front side door outside handle cable retainers (2).
  9. Front Side Door Lock Cylinder ReplacementΒ  - Remove
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.