Front Side Door Lock Cylinder Opening Cover Replacement

2019 Chevrolet Cruze LS, 4D HatchbackSECTION Front Side Door Lock Cylinder Opening Cover Replacement
GM3650392Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Bolt Access Plug
Procedure 
Use a flat bladed plastic tool to remove.
2 Front Side Door Outside Handle Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
4.7 N.m (42 lb ft)
3 Front Side Door Lock Cylinder Opening Cover

Procedure

  1. Pull the lock cylinder from the housing to remove.
  2. Inspect the lock, lock cylinder and handle adjustments. Refer to Front Side Door Lock Cylinder Rod Replacement.
NOTE:

Pull the front side door outside handle to unlock the door lock cylinder opening cover.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.