Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Removal Procedure
- Front Side Door Outside Handle Replacement (without Keyless Entry) Front Side Door Outside Handle Replacement (with Keyless Entry) - Remove
- Front Side Door Window Regulator Replacement - Remove
Loosen the front side door outside handle bracket bolt (1).
Disconnect the electrical connector. (3)
- Remove the front side door latch bolt (2).
- Loosen the front side door latch bolt (1).
Electrical Connector (1) - Unclip @ Front Side Door Outside Handle Bracket
- Remove the front side door latch with front side door outside handle bracket from front side door.
Front Side Door Outside Handle Cable (1) @ Front Side Door Latch (3) - Remove
- Front Side Door Lock Cylinder Rod (2) @ Front Side Door Latch (3) - Remove
- Front Side Door Inside Handle Cable (4) @ Front Side Door Latch (3) - Remove
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.