Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019CAMARO LS, 3.6L ENG VIN S, STANDARD TRANSREPAIR AND DIAGNOSISDRIVELINES & AXLESAXLE SHAFTSWHEEL DRIVE SHAFTSSPECIFICATIONSFASTENER SPECIFICATIONS
2019 Chevrolet Camaro LS, 3.6L Eng VIN S, Standard Trans
Fastener Specifications
2019 Chevrolet Camaro LS, 3.6L Eng VIN S, Standard TransSECTION Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Rear Wheel Drive Shaft to Drive Flange Washer |
| Wheel Drive Shaft Washer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Torque Prevailing Wheel Drive Shaft Nut | 250 N.m (185 lb ft) |
| Rear Wheel Drive Shaft to Drive Flange Bolt | |
|
50 N.m (37 lb ft) |
|
45 degrees |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.