Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019BLAZER PREMIER, FWDREPAIR AND DIAGNOSISSTEERINGSTEERING COLUMNSTEERING WHEEL AND COLUMNREPAIR INSTRUCTIONSSTEERING COLUMN LOWER TRIM COVER REPLACEMENT (N37)INSTALLATION PROCEDURE
2019 Chevrolet Blazer Premier, FWD
Installation Procedure
2019 Chevrolet Blazer Premier, FWDSECTION Installation Procedure
Position the steering column lower trim cover (2) to the steering column.
- Secure the steering column upper trim cover to the steering column lower trim cover (2).
- Rotate the steering wheel left and right to access the fasteners securing the lower trim cover to the turn signal switch bracket.
- Steering Column Lower Trim Cover Bolt (1) - Install and tighten [3x] 2.5 N.m (22 lb in)
CAUTION:
Refer to Fastener Caution .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.