Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2019BLAZER PREMIER, FWDREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENT PANEL AND CONSOLE TRIMREPAIR INSTRUCTIONSINSTRUMENT PANEL EXTENSION REPLACEMENT

2019 Chevrolet Blazer Premier, FWD

Instrument Panel Extension Replacement

2019 Chevrolet Blazer Premier, FWDSECTION Instrument Panel Extension Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove the left and right windshield garnish molding. Windshield Garnish Molding Replacement

Instrument Panel Extension

Procedure

Using a flat-bladed plastic trim tool, release the retaining clips.
Disconnect the electrical connector.
Pull the instrument panel extension rearward to clear the integral tabs from the upper trim panel.
Transfer components as necessary.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.