Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2019BLAZER PREMIER, FWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR, ENTERTAINMENT, AND NAVIGATION SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESVOICE RECOGNITION MALFUNCTIONCIRCUIT/SYSTEM VERIFICATION
2019 Chevrolet Blazer Premier, FWD
Circuit/System Verification
2019 Chevrolet Blazer Premier, FWDSECTION Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode - Infotainment System State - ONNOTE:
Refer to the following Owner's/User's Manual for detail information: Voice Recognition - Helpful Hints for Speaking Commands
- Press the following button: Steering Column Infotainment Controls Voice Recognition Button - Clearly speak an available voice recognition command.
- Verify the procedure/test passes.
- If the procedure/test does not pass
- Clearly speak a different voice recognition command.
- Verify the procedure/test passes.
- If the procedure/test does not pass - Refer to Circuit/System Testing.
- Go to next step: If the procedure/test passes
- Refer to the following Owner's/User's Manual for detail information: Voice Recognition - Helpful Hints for Speaking Commands
- Go to next step: If the procedure/test passes
- All OK.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.