Circuit/System Description

The liftgate control module controls the liftgate release motor by supplying 12V to the release control circuit. The motor control circuits are monitored by the liftgate control module prior to activation for a high or low condition and during motor operation for an insufficient current flow condition.

The ratchet, pawl, and sector switches are part of the liftgate latch assembly and are used by the liftgate control module to determine the state of the latch during the process of latching or unlatching. The ratchet and pawl switches will be inactive when the primary and secondary latches are latched, and the sector switch will be active during the power cinch function. Each of the latch switch signal circuits are supplied battery voltage through a resistor and monitored within the liftgate control module. When the switch contacts close the signal circuit goes low and the liftgate control module determines the switch to be active.

The latch motor is a bi-directional motor and cinch or unlatch operation is the result of the direction of the motor rotation. The liftgate control module controls the latch motor through the control circuits by supplying power and ground in the appropriate polarity. The motor control circuits are monitored by the liftgate control module prior to activation for a high or low condition and during motor operation for an insufficient current flow condition.