Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Front Side Door Window Upper Reveal Molding Replacement
2018 Chevrolet Traverse LS, 4WDSECTION Front Side Door Window Upper Reveal Molding Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Open the front side door. |
|
| 1 | Front Side Door Window Upper Reveal Molding Bolt
CAUTION:
Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in) |
| 2 | Front Side Door Window Upper Reveal Molding Procedure Using the appropriate tool, release the upper reveal molding starting at the front working to the rear of the front door. Slide molding rearward to release the hook clip from the rear of the front door. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.