Liftgate Window Weatherstrip Replacement (Chevrolet, GMC)

2018 Chevrolet Tahoe LT, 4WD, GasSECTION Liftgate Window Weatherstrip Replacement (Chevrolet, GMC)
Fig 1: Liftgate Window Weatherstrip (Chevrolet, GMC)
GM3620116Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Open the liftgate window.
  2. Disconnect the electrical connectors from the rear window defogger.
1 Liftgate Window Weatherstrip

Procedure

  1. Roll the weatherstrip from the center to the upper corners.
  2. Roll the weather strip from the upper corners to the lower corners.
  3. Roll the weatherstrip from the lower corners to the center.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.