Front Side Door Window Channel Retainer Replacement

2018 Chevrolet Tahoe FL, 4WD, GasSECTION Front Side Door Window Channel Retainer Replacement
Fig 1: Front Side Door Window Channel Retainer
GM3967508Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the front side door inner sealing strip. Refer to Front Side Door Window Inner Sealing Strip ReplacementΒ .
  2. Remove the front side door pull handle bracket. Refer to Front Side Door Pull Handle Bracket Replacement .
  3. Remove the front side door water deflector.
1 Front Side Door Access Hole Plug
2 Front Side Door Window Channel Retainer Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


TightenΒ 
11 N.m (97 lb in)
3 Front Side Door Window Channel Retainer
NOTE:

Inspect the window for proper operation before installing the door trim.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.