Diagnostic Aids

2018 Chevrolet Tahoe FL, 4WD, GasSECTION Diagnostic Aids
  • A poor video image can be caused by ice, snow, and mud buildup on the lens of the appropriate camera. Also, extreme lighting conditions can affect performance, such as operating in the dark or with bright sunlight shining on the camera. Extreme high or low temperatures can also affect the image quality. An open in the shield of the video signal circuit can also cause a distorted screen.
  • If any one of the cameras are misaligned  or replaced  on the Surround Vision Camera System, the displayed image may not be correctly stitched due to a change in the location or orientation of the camera. The only way to correct an incorrectly stitched, or poorly aligned image is to perform the calibration procedure. Refer to Video Processing Control Module Calibration 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.