Forward Range Radar Bracket Replacement (Cadillac With AVF)

2018 Chevrolet Tahoe FL, 4WD, GasSECTION Forward Range Radar Bracket Replacement (Cadillac With AVF)
Fig 1: Forward Range Radar Bracket (Cadillac With AVF)
GM4186273Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Forward Range Radar Bracket Bolt (Qty: 3)
CAUTION:

Refer to Fastener Caution


Procedure 
Using the appropriate tool on the pilot end of the bolt, loosen the bolts.
Tighten 
9 N.m (80 lb in)
2 Forward Range Radar Module Bracket

Procedure

  1. Disconnect the electrical connector.
  2. Transfer components as necessary.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.